that Alarm Time setting. Press “ +” (B7) or “-” (B11) buttons to adjust the alarm time.
z
When viewing Alarm Time 1 or Alarm Time 2, press “AL ON/OFF” (B3) button to switch that alarm
on or off. If it is on, “
” or “
”shown on the LCD.
z
Press “SNOOZE” (B2) button when alarming . The alarm will snooze for 5 minutes, then it alarms
again. This snooze function can be enabled for maximum 7 times.
z
Press “MODE/SET” (B1) or “AL ON/OFF” (B3) button to stop the snooze alarm.
Low Batteries Indicator:
y
Low battery icon “
“ appear at outdoor temperature row in particular channel indicating that
Thermal Sensor Unit of the channel is in low battery status. The batteries should be replaced..
Note:
z
Use a pin to press the reset button (B13) if the Unit does not work properly.
z
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
z
The clock loses its time information when the battery is removed.
z
Buttons will not function while scanning for DCF or thermo sensor’s signal unless they are well
received or stopped manually.
