EN.6
TO ADJUST DISPLAY BRIGHTNESS
Press
SNOOZE/ DIMMER
repeatedly to select brightness of the display
Bright => Low => Off =>
Bright.
This can only be done when the adapter is being used.
TO USE THE PROJECTION (operated by adaptor only)
1. Press
PROJECTION
once to turn on the projection.
2. Press
PROJECTION
once again to turn off the projection
3. When the projection is turned on, press and hold
PROJECTION
to flip the projected image upside
down.
4. At the bottom of your unit, use the rotary knob to rotate the projected image by 90 degree.
Remark
: when the clock is running the
SLEEP
function, the segment counting will be displayed and
projected at the same time.
REPLACING THE BATTERY OF THE REMOTE
Press down the latch on the remote, then open up the front and back case. Replace the lithium
battery with a fresh one, make sure the + polarity is facing up. Replace the front and back cases.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference. Use a sharp object to press the reset button at the back of your
unit once.
Your unit will be reset to default settings and you need to set it again.
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless devices, the
reception is maybe affected by the following circumstances:
• long transmitting distance
• nearby mountains and valleys
