Press “
” once to switch to alarm time display, it will back to normal when there is no key operation within 10 seconds.
Ho
ld “
” more than 2 seconds to enter the alarm setting mode.
While the alarm sounds
, press “SNOOZE” and the alarm will ring again in 5 minutes.
4.2.
Manual Setting mode
In normal display, hold the
“SET” button for more than 2 seconds to enter manual setting mode.
The year digits flash on the LCD, press "+/C/F" or "-/wave" to adjust the year. Hold a button for more than 2 seconds to accelerate
this operation.
Press
“SET” once and the month digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the month.
Press
“SET” once and the date digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the date.
Press
“SET” once and "00" is flashing on the LCD. Press "+/C/F" or "-/wave" to adjust the time zone.
Press
“SET” once and "24 Hr" is flashing on the LCD. Press "+/C/F" or "-/wave" to choose between 12 Hr or 24 Hr time display.
Press
“SET” once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the hour.
Press
“SET” once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the minutes.
Press
“SET” again or press no key pressed for approx. 20 seconds to exit the setting mode.
4.3.
Alarm Setting mode
In normal mode, press the
“
” button once to display the alarm time, press “+/C/F” or “-/wave” to activate or deactivate the alarm.
In normal mode or alarm time display mode, hold the
“
” button for more than 2 seconds to enter the alarm time setting mode.
Press
“
” once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm hour. Hold a button for more than
2 seconds to accelerate this operation.
Press
“
” once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm minutes.
Press
“
” again or press no key pressed for approx. 20 seconds to exit the setting mode.
5. WEATHER ICONS
The 7 weather forecast symbols: sunny, semi-sunny, cloudy, rainy, rainstorm, snow, heavy snow
6. ALARM FUNCTION
While alarm, the
icon flashes,
While alarm,
press ‘SNOOZE’ to start 5 minutes snooze time, icons
&
icons are flashing.
Press other keys to stop the alarm
7. RF TEMPERATURE
The station will automatically receive start the outdoor sensor reception for 3 minutes.
Icon will be displayed.
In normal mode, hold
“+/C/F” more than 2 seconds to start the outdoor sensor reception, previous received data will be cleared.
When in RF receiving mode, other keys are no function except
“+/C/F” to exit.
When the outdoor sensor was not received, it will be displayed again when a new signal is received.
8. DCF-77 Reception
1.
DCF-77 will be automatically received after start or reset.
2.
Press“-/WAVE” for 2 seconds to start the reception.
3.
Automatic reception
：
On 1:00, 2:00 and 3:00. If the reception fails, it will continue at 4:00 and 5:00.
