AutoGRAPH-GSM • USER MANUAL
53
TechnoKom © 2015
Drivers Installation
This section covers the procedure of installing the drivers of the AutoGRAPH-GSM controller
for Microsoft Windows 7 OS.
The AutoGRAPH-GSM controller drivers required for Windows 2000, XP, Server 2003, Vista, 7, 8,
Server 2003, Server 2008 (x86 and x64) are free of charge and can be downloaded from the official
website of TechnoKom: http://www.tk-chel.ru
i
NOTE
5.
Browse to the location where the drivers are saved (Fig.3).
6.
Install the driver. When the driver is installed the system will automatically identify
connected device (Fig.4).
7.
If necessary, install drivers for the AutoGRAPH CDC device following the outlined
instruction.
8.
Drivers for the AutoGRAPH-GSM are successfully installed. The device is ready to
operate with troubleshooting utilities, dispatch software and other applications (Fig.5).
To install the tracker drivers onto Microsoft Windows 7 OS:
1.
Connect the tracker to your PC using the interface cable. The system will automatically
search for new equipment (Fig.1). For proper operation, it is sufficient to install drivers for
AutoGRAPH device. The AutoGRAPH CDC drivers are required for the tracker operation
in the GPS-mouse mode.
2.
If the Internet connection is available, Windows 7 will automatically connect to
the Windows Update website and install suitable driver for the tracker. If the Internet
connection is not available, continue with the procedure outlined below.
3.
Download the archived drivers folder from the official website of TechnoKom -
AGUSBDriver.zip and extract files to a temporary directory on a hard drive.
4.
Launch the driver update wizard and select «Browse my computer for driver software»
to search for drivers manually (Fig.2).
Figure 1.
Figure 2.