Technogym SELECTION PRO, Руководство пользователя

Страница: 5 / 29

Leg Curl 5
Personal safety
Completely assemble the equipment before using it.
Maintain the equipment in good working condition.
Before each use check the equipment, check that the cable is correctly routed inside the races of all the pulleys and the state of wear of the
cable. If there are signs of wear, contact the Technogym Technical Support service.
Do not continue to operate the equipment when it is not working properly.
Do not attempt to service the equipment yourself other than the maintenance instructions found in the user manual.
Assemble and operate the equipment on a solid, level surface.
Do not put anything on the frame.
Use of the equipment is subject to a medical examination in relation to the intended type of exercise, and compliance with the conditions of
use indicated by the manufacturer.
Persons suffering from certain physical conditions may only use the equipment under the strict supervision of a specialist doctor.
Before starting an exercise, make sure your position on the equipment is correct, and be careful with any components that might constitute
an obstruction.
Wear proper exercise clothing and shoes during a workout: no garments that impede perspiration and no loose clothing. Tie long hair back. Keep
garments or towels away from moving parts.
Choose suitable exercises for your physical characteristics and state of health, starting with light loads.
Do not overexert yourself or work to exhaustion. If you feel any pain or abnormal symptoms, stop your workout immediately and consult your
physician.
Make sure that the load selection pin is fully inserted. Use only the pin provided by the manufacturer. Contact the staff for any questions.
Only remove the pin when the weight stack is in the rest position. The weight stack is in the rest position when both the weights and the
crosspiece are not in the air. If the weight stack is not in the rest position, contact floor staff and do NOT use the equipment.