17
FITTING AND REMOVING THE SIDE HANDGRIPS
To fit the side handgrip:
Insert the top of the handgrip into the slot above
the profile (
A
).
Place the lower end of the handgrip against the
frame.
Fully raise the lever (
B
).
To remove the side handgrip, follow the fitting instructions
in reverse order:
Lower the lever (
B
) and keep it pressed forward.
Pull out the handgrip.
STORAGE
If the unit is not expected to be used for a long period of time, we recommend to store it:
In a clean and dry place, covered with a cloth to protect it from dust.
At a room temperature b10 °C and +25 °C and a relative humidity between 20% and
90%.
Use the
original packing materials
to better preserve the treadmill.
DISPOSAL
Do not dump the treadmill in the environment or public areas.
The treadmill is made of recyclable materials such as steel, aluminium and plastic, which must be
disposed of in a manner required by the urban refuse collection regulation force
– by a specialised
urban hygiene and environmental firms.
Electrical and electronic waste must not be put out for normal waste collection. A specific waste
collection system is provided for with this type of product, in conformity with applicable legislation
requiring appropriate handling, recovery and recycling.
Unauthorized dumping or disposal of electrical and electronic equipment or its improper use can cause
serious damage to the environment and human health.
Following measures implemented by the member states of the European Union, private EU citizens
can take their used electrical and electronic equipment to authorized collection centres for disposal.
If the product is used commercially, contact your reseller or the customer service in your country to
arrange collection and disposal of the electrical and electronic waste.
