Technical
information
Vario Excite
Recharging the battery (700 SP and 500 SP versions)
The 700 SP and 500 SP versions have to be
kept moving to keep them turned on; if, when
you stop moving, the control panel switches
off without warning, the battery will have to
be recharged.
If, 0 seconds after starting movement, the
resistance of the equipment is exceptionally
high even at effort level , recharge the battery
with the charger.
W
arning
Do not use the equipment while the battery is recharging.
Charger electrical specifications:
Input
00÷0 Vac 0, A 50/0 Hz
Output
5 V dc W
Class II
W
arning
Only use devices that comply with applicable standards.
identification
Description of the equipment
Technical data
Accessories
Safety devices and notices
Place of installation
Moving the equipment
Levelling
Electrical connection
Connection to another device
Routine maintenance
Changing the fuses
Recharging the battery
Troubleshooting
Technical assistance
Storage
Disposing of the equipment
Switching on and off
Monitoring the heart rate
Ergonomic positioning