cont.
Technical
information
Vario Excite
Electrical connection (700 and 500 versions)
Before connecting the equipment to the mains power supply, ensure that the electrical system
specifications comply to binding regulations. Check the mains power supply specifications
on the label applied to the frame under the control panel.
D
anger
The wall socket must be located in a place where the plugging and unplugging
can be done easily and safely.
When plugging in, the switch on the equipment must be in the 0 position (i.e. the
equipment must be switched off).
Plug the power cable first into the equipment socket and then into the wall socket.
W
arning
Check the state of the power supply cable periodically.
identification
Description of the equipment
Technical data
Accessories
Safety devices and notices
Place of installation
Moving the equipment
Levelling
Electrical connection
Connection to another device
Routine maintenance
Changing the fuses
Recharging the battery
Troubleshooting
Technical assistance
Storage
Disposing of the equipment
Switching on and off
Monitoring the heart rate
Ergonomic positioning
