DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
56
www.technoac.com
11.8. Sound Signals
The.sound.signals.correspond.with.the.specific.events.and.conditions.
Welcome tune
.consists.of.9.notes.activatied.by.the.device.switching.on.via.pressing.
POWER.“
”.button.
High note
..while.pressing.CHOICE.“
”.button.during.the.automatic.adjustment.–.the.relevant.action.
took.place.
High note
while.pressing.MORE.“ ”.button.—.the.increase.(alteration).of.the.parameter.value.
(mode).
Low note
..while.pressing.LESS.“ ”.button.—.the.decrease.(alteration).of.the.parameter.value.
(mode).
Very low note
.by.pressing.one.of.the.buttons.LESS./.MORE.“ . ”.-.the.action.is.not.allowed.by.the.
program.
Double note
.signal.by.pressing.CHOICE.“
”.button.in.the.“stop”.mode.–.the.relevant.action.
took.place.
Dual sound
.signal.by.pressing.START./.STOP.“
”.–.initiation.or.shutdown.of.the.oscillation.
Triple note
signal.by.pressing.START./.STOP.“
”.-.the.manual.interruption.of.the.automatic.
adjustment.
The.
sequence of the rising notes ending with the triple note signal
.–.the.full.cycle.of.the.
automatic.adjustment.
Double note sequence (“siren”)
.-.output.current.overload.
Sequence of the triple note “alarms”
.–.hardware.current.safety.system.activation
Sequence to the quadruple note “alarms”
.–.power.supply.voltage.is.unacceptably.low.
Quick sequence of the similar high note
.—.power.supply.voltage.is.unacceptably.high.
Farewell phrase
.consists.of.the.three.falling.notes.during.manual.shutdown.of.the.device.by.
the.pressing.POWER.“
”.button.
12. Working with the Device
Prior to the “contact” connection, it is necessary to make sure that the utility under
examination has no voltage to “earth” and also that there are no works carried out or
scheduled to be conducted, which execution can lead to deliberate or accidental contact
with conductive part which is under the voltage. If the examination of cable under voltage
is required, one should use “non-contact” method of connection with the help of the
transmitting antenna or induction clamp.
WARNING! Do not touch terminals of output connection cables and elements of the utility
being examined while the transmitter is on.
WARNING! Do not connect and disconnect connection cables while the transmitter is on.
WARNING! Do not connect and disconnect connection cables while the transmitter is on.
12.1 Preparatory activities
12.1.1.Remove.the.battery.set.by.simply.pulling.up.by.the.handle.and..
insert.8.power.supply.elements.into.it,.observing.the.polarity.(batteries.
or..NiMh.accumulators)..Put.the.battery.set.back...
12.1.2..When.the.transmitter.is.being.turned.on,.it.indicates.the.type.of..
power.supply..In.order.to.change.the.type.of.power.supply,.you.have.to..
turn.on.the.transmitter.holding.“
”.button..
After.that,.you.can.switch.the.type.of.power.supply.by.pressing..
.“ ”and.“ ”..You.can.choose.between.battery.“
”.or.accumulator.“
”.
To.confirm.your.choice.of.power.supply.type,.press.start.button.“ ”.
NOTE: Using the accumulators without corresponding transmitter
setting, may cause their malfunction.
Содержание Success AG-309.15 N
Страница 1: ......