RCC Zone Offset
This clock is equipped with radio controlled time adjustment. The user will need to work
out the time zone signal they receive at their current location and make (any) adjustment
as required. This function also allows for daylight saving adjustment. Contact your local
weather bureaus or authorities for more information.
Press
-/ RCC
button (3) once for +1 time zone.
Press
-/ RCC
button (3) once again for +2 time zone.
Press
-/ RCC
button (3) once again for -1 time zone.
Press
-/ RCC
button (3) once again for same time zone.
To set time manually:
Hold down the
MODE
button (1) for approximately 3 seconds until the display is flashing.
Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change the hour setting.
Press
MODE
button (1) again. Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change
the minute setting.
Press
MODE
button (1) again. Press
+/°C/°F
button (2) or
-/ RCC
button (3) to toggle
between am / pm and 24 hour clock
Press
MODE
button (1) again to confirm settings. Display will no longer flash.
To see alarm time:
Press
MODE
button (1) once and alarm time 1 will be shown as indicated by
.
Press
MODE
button (1) again and the current time will be shown.
To set alarm time:
Press
MODE
button (1)
once and alarm time 1 will be shown as indicated by
.
Press and hold
MODE
button (1) for approximately 3 seconds until the digits flash.
Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change the hour setting.
Press
MODE
button (1) again.
Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change the minute setting.
Press
MODE
button (1) again.
When alarm time is shown, press
MODE
button (1) to turn on and off the alarm.
will
be shown when the alarm is on.
When alarm time is shown, press
+/°C/°F
button (2) or
-/ RCC
button (3) to turn on and
off the alarm.
will be shown when the alarm is on.
The alarm will sound for 120 seconds when the preset alarm time is reached. Hit any
button on the back of the clock to deactivate the alarm. The clock will automatically enter
snooze mode if the alarm is not deactivated.
Hit the
SNOOZE / LIGHT
button (4) when the alarm is on to enter snooze mode.
will flash when the clock is it snooze mode. The alarm will sound again in 5
minutes. Hit any button on the back of the clock to deactivate the alarm.
Please note that alarm time setting seize to function when the clock is in RCC
synchronization mode. Wait until synchronization has ended before setting the alarm
