1.
Plug in AC/DC adapter at DC input jack (8) (see fig. 2). Use only approved
adapters.
Batteries installation
1. Open battery compartment (9) on the back of the unit (see fig. 2).
2. Install/ replace 2 x AAA size batteries in the compartment. It is recommended that
only alkaline batteries are used.
3. Replace the battery compartment (9) on the back of the unit.
4. A short beep will be heard to confirm proper installation of batteries.
5. It will take approximately 3 seconds for the screen to light up.
6.
Replace batteries when this symbol
is shown. This indicates low batteries.
Batteries safety warnings:
1. Please read all instructions carefully before use.
2. Install batteries correctly by matching the polarities (+/-).
3. Always replace a complete set of batteries.
4. Never mix used and new batteries.
5. Remove exhausted batteries immediately.
6. Remove batteries when not in use.
7. Do not recharge and do not dispose of batteries in fire as the batteries may
explode.
8. Ensure batteries are stored away from metal objects as contact may cause a
short circuit.
9. Avoid exposing batteries to temperature or humidity extremes or direct sunlight.
10. Keep all batteries out of reach from children. They are a choking hazard.
11. Please retain packaging for future reference.
Setting up the weather station:
The weather station will sound once batteries are installed or ac adapter is plugged in.
1. The double digits of sea level on the bottom left hand corner of the display will
flash. Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change the sea level
closest to your location. The sea level units are in meters (1 meter equals
approximately 3.28 feet). Contact your local weather bureaus or authorities for
more information.
2. Press
HISTORY
button (5) to confirm sea level.
3. Press
+/°C/°F
button (2) or
-/ RCC
button (3) to change the current weather
situation of your location. See figure 3 below for the weather pattern that is
resembles your immediate area.
Fig. 3 Weather pattern
