background image

Summary of  DO-160C Environmental Testing for Technisonic Model TFM-530,  VHF and VHF Low Transceiver:

Conditions

Section

Description of Conducted Tests

Temperature and Altitude

4.0

Equipment tested to categories B2 and D1.

Vibration

8.0

Equipment is tested without shock mounts to

categories B, M and N.

Magnetic Effect

15.0

Equipment is class A.

Power Input

16.0

Equipment tested to category B.

Voltage Spike

17.0

Equipment tested to category B.

RF Emission

21.0

Equipment tested to category Z.

Installation Approval Note

Presently no TSO standard exists for airborne FM transceivers. To make it easier for installation agencies to

provide their customers with an approved installation supported by an effective Airworthiness Approval,

Technisonic has secured Supplemental Type Certificate (STC) Approvals (both US and Canadian) on its Airborne

FM products  for many helicopters currently being delivered in the US and Canada as well as a number of single
engine fixed wing aircraft. The above referenced DO-160C test data is also on file and available from Technisonic

to support approval requirements in airframes for which Technisonic does not possess an STC.

Approved aircraft types are listed in the attachments to the formal STC documents. These STC's are the exclusive

property of Technisonic and require the written authority of Technisonic for their use. To assist Factory Authorized

Technisonic Dealers in the certification process, we have placed copies of our Canadian and US STC's on our web

site along with a letter of authorization for their use. These documents may be downloaded and used as support

for the technical submission to FAA or Transport Canada. Only factory authorized dealers/installers are permitted

to download and make use of these documents on behalf of their customers (end users) in support of regulatory

agency approval.  Please refer to the Technisonic web site 

www.til.ca

 for the latest issue of available STC’s and

letter of authorization for use.

B page

Содержание TFM-530











































Отзывы: