Technische Alternative ANS 21 Скачать руководство пользователя страница 12

 

 

Guarantee conditions 
 

Note: 

The following guarantee conditions do not in any way limit the legal right to a 

guarantee, rather expand your rights as a consumer. 
 

1.  The company Technische Alternative elektronische Steuerungsgerätegesellschaft m. b. H. 

provides a two-year guarantee from the date of purchase by the end consumer for all the 
devices and parts which it sells. Defects must be reported immediately upon detection and 
within the guarantee period. Technical support knows the correct solution for nearly all 
problems. In this respect, contacting us immediately will help to avoid unnecessary expense or 
effort in troubleshooting.  

 

2.  The guarantee includes the free of charge repair (but not the cost of on site fault-finding, 

removal, refitting and shipping) of operational and material defects which impair operation. In 
the event that a repair is not, for reasons of cost, worthwhile according to the assessment of 
Technische Alternative, the goods will be replaced.  

 

3.  Not included is damage resulting from the effects of overvoltage or abnormal ambient 

conditions. Likewise, no guarantee liability can be accepted if the device defect is due to: 
transport damage for which we are not responsible, incorrect installation and assembly, 
incorrect use, non-observance of operating and installation instructions or incorrect 
maintenance.  
 

4.  The guarantee claim will expire if repairs or actions are carried out by persons who are not 

authorised to do so or have not been so authorised by us or if our devices are operated with 
spare, supplementary or accessory parts which are not considered to be original parts. 

 

5.  The defective parts must be sent to our factory with an enclosed copy of the proof of pur-

chase and a precise description of the defect. Processing is accelerated if an RMA number is 
applied for via our home page 

www.ta.co.at

. A prior clarification of the defect with our technical 

support is necessary. 

 

6.  Services provided under guarantee result neither in an extension of the guarantee period nor 

in a resetting of the guarantee period. The guarantee period for fitted parts ends with the 
guarantee period of the whole device.  

 

7.  Extended or other claims, especially those for compensation for damage other than to the 

device itself are, insofar as a liability is not legally required, excluded. 
 

 
 
 
 

Technische Alternative 

elektronische Steuerungsgerätegesellschaft m. b. H.  
A-3872 Amaliendorf Langestraße 124 
Tel +43 (0)2862 53635                     Fax +43 (0)2862 53635 7
E-Mail: 

[email protected]

                      --- 

www.ta.co.at

  ---                                 © 2012               

Содержание ANS 21













Отзывы: