TechniSat TECHNIRadio 2, Инструкция по эксплуатации

Страница: 51 / 51

Draft 12/12/2016 12
11. CARE AND MAINTENANCE
•
Wipe external surfaces with a soft cloth. If the casing is very dirty, unplug
from the mains supply and use a damp cloth soaked in a weak solution of
washing up liquid and water. Allow to dry thoroughly before reusing.
12.
TROUBLESHOOTING GUIDE
Observation Potential cause / solution
The unit does not
work. Has the adaptor lead been correctly plugged into the
mains and the DC input jack at the side of the unit?
Does the socket that is being used have power?
Has the power lead been removed from the back of the
unit without the batteries being installed?
The unit does not
work on batteries Has the adaptor lead been removed from the radio?
Are the batteries inserted correctly?
Are the batteries exhausted?
No sound Is the volume control set at minimum?
Are headphones fitted in the phones jack?
Radio reception
noisy (FM) Extend the antenna or adjust the position of the radio.
FM stereo – if weak switch to MONO as this requires less
signal strength.
Radio reception
stutters / bubbling
sounds (DAB) Signal is weak. Extend the antenna or adjust the location
of the radio. Positions higher up or nearer windows may
improve reception.
DAB
‘No signal DAB’ This normally means the signal is very weak, not that there
is no signal. Try moving the radio to a different location and
re-scanning. Check that your local area has DAB coverage
on www.ukdigitalradio.com/coverage/postcodesearch/
13. TECHNICAL SPECIFICATION
Rated voltage (transformer) 100 – 240V~ 50/60Hz, 0.3A
Transformer output 6V 0.5A
Rated voltage (radio) DC 6V (1.5V x 4 AA)
Power consumption 3W
Power consumption (standby) 0.4W
Class rating (transformer) 2
Audio output 1W RMS
Radio DAB 174-240MHz
FM 87.5-108MHz
Operating conditions Temperature: 5°C to 35°C
Humidity 5% to 90%
Operating position Horizontal