Summary for everyday use
Switching on and off
>
Switch the receiver on by pressing the
On/Standby
key on the front panel of the
receiver, or on the remote control unit.
>
Press the key again, either on the front panel of the receiver or on the remote control,
to switch the receiver off.
>
The receiver is now in standby mode, and the display will show the current time.
Selecting a programme/channel
Using the up/down arrow keys:
>
You may use the
up/down arrow
keys, either on the receiver or on the remote con-
trol, to move up or down the selected programmes/channels one step at a time.
Using the numeric key pad:
>
Use the
numeric keys
to directly enter the number of the programme/channel you
wish to view. For instance
1
for programme slot 1
1
, then
4
for programme slot 14
2
, then
3
, then
4
for programme slot 234
When entering programme/channel numbers with more than one digit, you have approx. 3
seconds after pressing the last key to continue with the entry.
If you are entering a channel number with only one or two digits, we recommend you press
the
OK
key after entering the digit(s) in order to speed up the process.
Using the programme/channel list:
>
Press the key
OK
.
A list of programmes will be displayed.
When operating in TV mode, a list of TV programmes only will be displayed, when operating
in Radio mode, a list of radio programmes only will be displayed. The programme/channel
currently selected will be displayed in red.
>
You can now proceed to select a programme by using the
up/down arrow
keys;
the selected programme will be displayed in blue.
>
Press the
OK
key for the selected programme to be viewed.
>
The
up/down arrow
keys allow you to scroll through the programme list one entry
at a time.
>
The
left/right arrow
keys allow you to page through the programme list one page
at a time.
Volume adjustment
You have the facility to adjust the volume directly in your receiver, as opposed to adjusting
this via your TV set controls. This makes operation even more convenient, as you now have
all important functions combined on one remote control unit, and will have to use the remote
control of your TV set only very rarely. Whenever the receiver is switched on, the volume set-
ting used last will be set again.
>
Use the
key to increase the volume of your receiver, and the
Volume -
key to reduce the sound volume.
>
Press the
Sound on/off
key to mute the sound completely. Pressing the same key
again will restore the sound.
46
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 46
