26
-
When you power up the base, you will notice that the mood light will turn off
after the demonstration is complete.
Do not use metal or other conductive objects to make simultaneous contact
with the two power terminals
(5)
.
-
After placing the weather station in the designated location on the base,
the weather station will be powered from the base via the connected power
supply.
There is a magnetic field at the point where the DC power is connected to the
weather station (6). Please do not place cards with a magnetic stripe on it
(including credit cards, phone cards, bank cards, boarding passes, etc.).
4.2 Setting the clock
-
Press and hold the (SET) button for 2 seconds, 24/12Hr will start flashing, and
press the (UP) or (DOWN) buttons to set the time format you need.
-
Press (SET) button to confirm the setting and move to the next variables,
the setting order is as follows: 12/24Hr -> Hours -> Minutes -> Date format
(OJ/M or M/Day) -> Year -> Month -> Day -> Language for weekday display ->
Weather forecast pattern -> Pressure unit -> Pressure value.
-
While setting the value, press and hold the (UP) or (DOWN) button to set the
desired value faster.
-
Press (SET) button to confirm the last position and finish the setting procedure,
then it will return to normal mode.
When selecting 12Hr format, if "PM" is displayed before the hours, it means
the hour is post meridian
If no operation is performed within 20 seconds during setup, the unit will
automatically exit setup mode and return to normal operation.
