TechniSat DIGITRADIO Car 2, Инструкция по эксплуатации

Страница: 64 / 84

64
3. Turn and push the selection knob to indicate how the DIGITRADIO Car 2 is to be connected in the car.
> If you have connected the reception unit to the vehicle radio with the audio cable, select [LINE-OUT] . You can then
stipulate the amplification of the audio signal (normal or low).
> If you are connecting the reception unit via FM radio, select [FM TRANSF.] and select an FM frequency.
Make sure that the frequency you have selected is not being used by a radio station.
> Set the audio system in your vehicle to the same FM frequency as the one on the DIGITRADIO Car 2. Save it as one of
your favourites in your audio system to be able to find the FM frequency again quickly.
> After you have decided on a connection method for the DIGITRADIO Car 2, it will start to search for digital radio stations.
You will be able to listen to digital radio after the automatic station scan is complete.