![TechniSat DigitRadio 100 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/technisat/digitradio-100/digitradio-100_manual_1069452009.webp)
9
the end of the wired antenna to fix this in the required position for a better reception.
Usage of headphones
Using headphones may damage your hearing!
Do not listen to the radio at high volume through headphones. This can lead to per-
manent hearing damage. Before using headphones adjust the sound volume to the
minimum level if you (not supplied ) to connect a pair of headphones, the internal
speaker is muted.
>Use only headphones with 3.5mm stereo plug.
>Plug the headphones into the headphone jack (page 5 # 6 ) of the device. The sound
reproduction is now done exclusively through the headphones.
>If you want to listen through the speakers again, unplug the headphones from the
headphone jack of the device.
The way of replace batteries:
1. Open the battery compartment cover by using your thumb downward push the
bulge of the back of your remote control.
2. Install 2 new batteries which are non-rechargeable.
Note: do not reverse any battery and do not mix battery types, also do not mix old and
new batteries. When discard your old battery, please considering eco-friendly.
3. Fit 2 batteries, referring to the markings direction inside the battery compartment.
4. Cover the battery compartment door.
DAB mode
What is DAB?
DAB is a new digital format, through which you can hear crystal clear sound in CD
quality. DAB Broadcast a high-speed data stream in the radio channel. In difference to
conventional analog radio DAB transmits multiple channels on the same transmitter.
This is called ensemble or multiplexes. An ensemble consists of the radio station as
well as several service components or data services, which are sent individually by the
radio stations. Learn e.g. under www.digitalradio.de or www.digitalradio.ch.
Data compression
Digital radio uses the of advantages of human hearing. The human ear does not
perceive sounds that are below a certain minimum level. Data which are under the
so-called threshold in quiet can be filtered out. This is possible because in a digital
data stream for each information unit, the corresponding relative volume is also saved
for other units. In addition in a sound signal, the quieter portions are overlapped by
the louder for a given threshold. All the sound information in a piece of music that are