TechniSat DIGIT S3 DVR, Быстрый старт

Страница: 97 / 134

97
DE
EN
Loading SFI (EPG) data
Your digital receiver features an electronic programme guide (EPG) called SFI
( S ieh F ern I nfo). You must first get the receiver to download the EPG (SFI) data
from the broadcasters to enable electronic program guide data to be displayed.
For this reason, the receiver will automatically start downloading the EPG data
after the channel list update or after the channel scan is completed. This process
can take up to 30 minutes.
> If you do not want to wait for the EPG data to be downloaded, you can skip
this process by pressing the
INFO
key.
> The EPG data will then be automatically updated during the following night,
or you can update it manually at any time.
If the EPG update has been skipped, your device will automatically load the
EPG data at the time set according to Section 15.2 in the the instruction
manual, as long as the automatic EPG update (Section 15.1 of the instruction
manual) remains enabled and the device is also in Standby mode at this
time. You can also start the update manually at any time (Section 15.7 in the
instruction manual).
Digit S3 DVR_V2.indd 97 Digit S3 DVR_V2.indd 97 23/02/2022 08:53 23/02/2022 08:53