TechniSat DIGIT ISIO STC, Быстрый старт

Страница: 40 / 66

9 Timer recordings
Your device has the following timer functions:
1. DVR timer
This function is used to switch your digital receiver on and off to record the programme
selected as per Point 11.4.1 in your operating manual onto the selected recording medium
while you are out.
If the device has been switched on by the DVR Timer this is indicated by
z
DVR Timer
being shown on the display.
Some menu items are blocked and therefore cannot be called up or edited.
2. Channel-switching timer
If your receiver is in normal operating mode, it will switch to the programmed channel slot at
the set time.
In contrast to using the DVR timer option, the receiver and remote control remain fully
functional, and will not be switched off at the end of the programme.
3. Alarm
If your receiver is in standby mode, it is switched on when the programmed channel slot is
reached at the set time.
In contrast to using the DVR timer option, the receiver remains fully functional and will
not be switched off.
4. Series timer
To make it easier to find programmes, you can search for programme data highlighted in the
EPG using any terms. The series timer function is used to automatically generate ongoing
DVR timer settings for the programmes you find. The timer settings are also retained after
the EPG data has been updated. This removes the need for repeated manual programming
of timers, e.g. to record episodes in a TV series.
In order to ensure that DVR timers are only automatically generated for the desired
programmes, you must apply the settings with as much detail as possible. Otherwise,
the number of generated timers can become very high.
Overlaps with other timers can occur as a result of automatic DVR timer generation,
meaning that it may not be possible to execute all timers.
In the case of series timer generation, the settings for the timer lead-in and lead-out
times and Perfect Recording (Point 9.15.4) will be taken into consideration.
Caution!!!
Ensure that the receiver has acquired the correct time. During use, this is displayed in the
Infobox, and in standby mode in the panel display (if activated). If this is not the case, switch
the receiver to a major channel such as ZDF for approx. 30 seconds, to acquire the time.
10 Selecting a function
> You can open the
Navigation
menu (
NAV menu
) to select the function you want by
pressing the function selection button.
40