TechniSat DIGIT ISIO STC, Быстрый старт

Страница: 24 / 66

> Use the
right / left arrow keys
to select whether you have connected
1
or
2
DVB-S antenna signals.
> Confirm with the
OK
button to open the selection list.
Antenna configuration (DVB-S)
In this step of the installation, you can adapt your digital receiver setup to the configuration
of your antenna (DVB-S).
> If you want to accept the default antenna setting, press the
OK
button.
> If the configuration of your reception equipment does not conform to the default
setting, press the
Options key
.
> Now, as described in greater detail in Point 8.6 in your operating manual, apply the
appropriate antenna settings for your reception equipment and then press the
Back
button to return to the antenna configuration overview.
> Then confirm with the
OK
button to accept the settings.
Antenna configuration (DVB-T)
When using an active DVB-T antenna that does not have its own power supply, or if you do
not want to use this, your receiver's antenna amplifier can be supplied via the coaxial cable
by activating the Antenna feed. To do so, set the
antenna supply
to.
24