TechniSat DIGIPLUS UHD S, Быстрый старт

Страница: 120 / 160

120
> Now select the desired filter option from the list that appears and confirm the
selection using the OK button.
The channel list now only shows the channels that fit the desired criteria. In
order to filter the list further, follow the above steps again and set more filters
this way.
To remove all filters
>
Open the Option menu using the OPT button.
> Select the Filter option and press the OK button.
> Now select [Reset all filters] and press the OK button.
The full channel list is now displayed again.
11.3.6 Retrieving blocked channels
If a channel is selected that is blocked by the parental control function, the
message Device PIN will be displayed on the screen.
> Use the number buttons to enter the device PIN.
The selected channel can now be viewed. Alternatively:
>
Switch to a channel that is not blocked.
If global parental control is enabled, the device PIN code will be requested
again when the blocked channel is switched on. To make things easier for you,
you only need enter the PIN code once during each operating phase.
To do so, it is essential that you also observe the instructions and settings
regarding the global user-dependent parental controls (TechniFamily) in your
instruction manual.