To block access to a programme, proceed as follows:
>
Call up a programme list by pressing
OK
.
>
Press the
blue
function key (Change).
>
Now use the
arrow keys up/down
to select the
programme you wish to block/restrict.
>
Now press the
green
function key to select the
function
Parental Control
.
A lock symbol will appear next to the programme
selected.
>
If you wish, repeat the procedure until you have
blocked access to all programmes you wish to block.
>
When you have completed configuring the programme
list according to your preferences in the manner
described above, press the
Back
key twice to return
to normal operation.
>
In order to activate the parental control function, you
must still enter your personal PIN code under the
following point
Changing the PIN,
following which
you must switch on the parental control as described
in
Point 5.2.1 (Parental Control)
.
7.2 Changing the PIN
The PIN code is set at the factory to
0000
. In order to
activate the parental control function you must enter your own
personal PIN code in place of the factory setting.
Note! Do not forget your PIN code. If you do forget, plea-
se consult your authorised retailer!
In order to change the PIN code proceed as follows:
>
Press the
Menu
key to call up the
Main Menu
.
>
Use the
arrow keys up/down
to select the line
Settings
.
>
Confirm by pressing
OK
.
The sub-menu
Settings
will be displayed.
>
Use the
arrow keys up/down
to select the line
Change PIN,
and confirm by pressing
OK
. The
menu
Change Unit PIN
will be displayed
(Fig. 7-4).
>
Now use the
numeric keypad
to enter the current
PIN code (factory setting: 0000).
>
Now use the
numeric keypad
to enter the new PIN
code. Repeat the entry.
>
Once you have changed the PIN code in this manner,
press
Back
twice to return to normal operation.
Please note that you still need to activate the parental control
function, if desired, as described in Points 5.2.1 and 7.1.5.
28
(Fig. 7-4)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 28
All manuals and user guides at all-guides.com