You must now tune your TV set to the transmission channel
of the receiver. Select a free programme slot on your TV set
and tune it to channel 41 (refer to operating manual of the TV
set if necessary).
If you do not receive a clear image on channel 41, this may
be the result of a neighbouring channel being set to a pro-
gramme being received from the same antenna. You can
check on this by temporarily removing the antenna cable from
the
Input terrestrial antenna
socket of the receiver. If
you then temporarily receive a clear image, you should select
another transmission channel for the receiver in the range of
21 to 69.
4.4 Setting the UHF output channel
Proceed as follows:
>
Press the
Menu
key to display the
Main Menu
.
(Fig.
4-1)
>
Now select the line
Settings
, using the
arrow keys
up/down
to mark the appropriate line.
>
Confirm by pressing
OK
.
The sub-menu
Settings
will be displayed.
(Fig. 4-2)
>
Now use the
arrow keys up/down
to highlight the
line
Audio/Video Settings
.
>
Confirm by pressing
OK
.
The sub-menu
Audio/Video Settings
will now be
displayed.
(Fig. 4-3)
>
Now, use the
arrow keys up/down
in order to hig-
hlight the blue field, thus selecting the menu line
UHF
output channel
.
>
Now tune your TV set to a free UHF channel in the
range of 21 to 69.
>
Then set the new output channel of the receiver by
means of the
arrow keys right/left
.
The receiver will now transmit on the UHF channel
shown on the display.
12
(Fig. 4-1)
(Fig. 4-2)
(Fig. 4-3)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 12
All manuals and user guides at all-guides.com