---------------------------------------------------------------------------------------
19
½
Choose the menu line Select by marking the corresponding line red with the help
of the cursor keys up/down.
½
Confirm with OK.
The sub-menu Select appears.
Here you will find a list of the bouquets with their channels. Existing channels are
printed in black and newly found channels are printed in red. Channels listed in
the user list are marked with a red cross. Encoded channels are marked with a
key symbol.
½
With the help of the cursor keys mark the channel or bouquet you would like to
alter. (-/+ = previous/next page, up/down = line up/down)
The name of a bouquet is marked blue and the channels are marked grey.
½
On pressing OK a red cross will be added to this field (entering it to the user
defined list).
If a single channel is added, the picture of that channel is shown in the back
ground of the menu.
On pressing OK again, the red cross will be removed and the selected channel will
be removed from the user defined list. But, it will remain in the complete channel
list and can be added to the user defined list at any time.
If you select a bouquet, the adjustment will be made for the whole bouquet. If you
select a single channel, the adjustment will be made for that channel only.
New channels will be added to the end of the user defined list and can then be
sorted to a different location.
6.2
Sorting of channels
To alter the user defined channel list proceed as follows:
½
Call Main Menu with the MENU button.
½
Choose the menu line TV Programs to sort TV channels or Radio Programs to
sort radio channels by marking the corresponding line red with the help of the
cursor keys up/down.
½
Confirm with OK.
The sub-menu Programs appears.
½
Select Sort with help of the cursor keys up/down.
½
Confirm with OK
The user defined channel list will appear.
½
Select the channel you would like to place at a different location.
½
Confirm with OK
½
Now you can move the selected channel with help of the cursor keys to the
location in the list you prefer or you can enter the memory position with the
number keys of your remote control. The memory location will be shown in the
menu.
½
On pressing OK the channel will be placed in the marked position.
½
Repeat this procedure until the programmes are in the desired sequence.
½
On pressing the MENU button you will leave the menu.
