TechniSat AudioMaster BT, Руководство по эксплуатации

Страница: 39 / 48

39
English
Enabling/disabling WAK mode:
1
Press and hold the Mute button from the switched on AudioMaster Bt until
is shown on the display.
2
Press the +/– volume buttons to switch the function on or off. or is
shown on the display.
3
Press and hold the Mute button again to exit the menu.
Automatic on and off (WAK mode)
the AudioMaster Bt has a mode (WAK mode) in which the device responds to signals at the tV and dVd input. the AudioMaster
Bt automatically switches off as soon as there is no longer a signal at the tV or dVd input, e.g. when the connected tV has been
switched off. the AudioMaster Bt switches off with a delay of approx. 30 seconds. if a signal is detected at the last selected tV
input, e.g. because a connected tV device is switched on, the AudioMaster Bt automatically switches on. However, the AudioMaster Bt
does not switch on automatically by turning on the tV-set, when the dVd input has been selected before the automatic turning off
and vice versa.
WAK
OFF ON
Please note the following when WAK mode is enabled:
When WAK mode is enabled, the AudioMaster Bt is in an extended standby mode so that it can respond to signals at the tV
or dVd input. if the AudioMaster Bt is switched into standby using the supplied remote control, it no longer responds to a
signal at the inputs. to be able to switch on and off automatically, the AudioMaster Bt has to be switched on again first using the
supplied remote control. Please also note that the "sound" button on the tV's original technisat remote control does not work
with the AudioMaster Bt when WAK mode is enabled. Please see the applicable section of the instruction manual for your tech-
nisat tV for further details.
since the AudioMaster Bt is in an enhanced standby mode while activating the WAK mode, the power requirement is typically
greater than the power requirement in the normal standby mode.