36
5.2 Safety instructions for mains cable, mains plug and charging cable
• Make sure that the charging cable at the side is compatible with the charging station.
• A damaged charging cable can cause fires or electrocution. Do not use this product if the
flexible charging cable or the vehicle cable is frayed, has damaged insulation, or displays
other indications of damage.
• Make sure that the charging cable is positioned in such a way that nobody can step on it
or trip over it, and that it is neither damaged nor over-stretched.
• Never forcefully pull on the charging cable and do not damage it with sharp objects.
• Never touch the mains cable or the plugs with wet hands since this may cause a short-
circuit or electrocution.
• In order to avoid the danger of fire or electrocution, the device must not be used with
extension cables. If the mains cable or the vehicle charging cable are damaged, they must
be replaced by the manufacturer, his customer service engineers or a similarly qualified
person in order to avoid hazards.
5.3 Safety instructions for wall mounting
• Do not install the charging station on the ceiling or an inclined wall.
• The charging station must only be operated when mounted vertically.
• The charging station must not be installed in enclosed cabinets.
• Use only the screws and accessories provided for wall mounting
• The device is designed for use indoors and outdoors. If the device is to be installed outdoors,
all the connection devices for outdoor operation must be designed and properly installed
so as to ensure that the prescribed IP protection rating is retained.
6 Information about the charging station
6.1 Scope of delivery
1
TECHNIVOLT
charging station
1 set of assembly instructions
1 instruction manual
1 installation template
1 set of installation accessories:
• 4 plastic plugs, M8 x 50 mm
• 4 safety screws, Torx T25, M6 x 75 mm
• 1 safety angle wrench, Torx-TR 20
• Wrenches for cable connections M20 and M32
