7
2.1
Input configuration
Input
The socket A or B to be used for the input can be selected in the selection box Input for the
selected channel unit.
Satellite In the Satellite selection box a known satellite can be selected from the TMS-BS5 satellite list.
Transponder
The Transponder selection box contains a list of transponders that are available at
the connected selection plane of the selected input. The precondition for this is that
the transponders are given in the satellite list.
The selection of a transponder automatically sets the values for the Sat-Frequency,
ZF frequency and Symbol rate.
In addition, the following search dialogue for channels and transponders can be
activated by the button to the right next to the selection box:
Using Store for a set of selected search results, transponders and the associated frequencies and the
symbol rates are filled in accordingly. Alternatively, the Sat-Frequency/ZF frequency and Symbol rate
can also be input manually, e.g. if a particular transponder is not included in the list of satellites.
If a valid DVB-S/S2 transport stream is received on the set frequency, then the Lock Status is set to
Locked. The text
boxes Mode, Code rate, C/N Reserve, SNR
and
BER
show in this case information
on the properties and quality of the received satellite signal.
Note
The satellite frequency and IF frequency depend directly on one another and are converted
automatically.
