TechniSat 0000/3953, Инструкция по эксплуатации

Страница: 67 / 148

67
DE
EN
FR
NL
Volume
> Use the

/

buttons to select the volume with which you wish to be woken
up.
Saving
> Press the OK button to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm and the alarm time.
16.2.2 Switching the alarm off after it has gone off
> Press the On/Standby button to turn off the alarm.
The alarm symbol appears on the display again if the alarm repeat is set to
Daily, Weekend or Workdays.
16.2.3 Switching off the alarm
> In the menu select the relevant alarm under > Repeat: Off.
17 System settings
All settings explained in this section apply equally to all sources.
>
Open the menu and use the

/

buttons to select >
[System Settings]
. Press the
OK
button to open the system settings.
17.1 Equaliser
> Press the MENU button and then select [System settings] > [Equaliser] .
Here you can carry out different equaliser settings to adapt the sound to your taste.
You can choose from:
Middle, Jazz, Rock, Classic and Pop.
>
Use the

/

buttons to select the equaliser setting and press the OK button
to accept the setting.
17.2 Audio stream quality
The quality of the audio stream may be adapted to the Internet speed. The higher
the quality, the higher the data transfer rate.
>
Press the MENU button and then select [System settings] > [Audio stream
quality] .
> Select a quality level and press the OK button to save.