background image

www.technimount.com

BP77 UG 202108-01

13

Return to Table of Contents

WARNING/CAUTION/NOTE (CONTINUED)

CAUTION

 

9

Only certified technical personnel familiar with the bracket installation and use should manipulate it. Always refer 

to Technimount's user guides for all instructions for installing and using any Technimount Mounting System.

 

9

Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts.

 

9

Never install the mount into or on other similar mounting systems or brackets without written confirmation by 

Technimount System as these different systems may be from other brands or models and may not be compatible 

with Technimount Systems.

NOTE

 

9

Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If such 

products are used to clean Technimount equipment, the equipment must be rinsed with clean water and thoroughly 

dried following the cleaning. Failure to properly rinse and dry the Mounting Systems will leave a corrosive residue 

on the surface, possibly causing premature corrosion of critical components.

 

9

When ordering, it is important to identify on which mounting system you need to mount the bracket on as there 

are different systems for different applications (ground).  

 

9

A maintenance program should be established for all Technimount equipment. Preventive maintenance may need 

to be performed more frequently, based on the level of use of the product. Close attention should be given to 

safety features (i.e.: screws, quick release mechanisms, and attachment points).

 

9

Failure to use authorized parts, and lubricants, could cause damage to the equipment and will void the warranty 

of the product.

 

9

This user guide should be considered a permanent part of the bracket, and should remain with the product even if 

the equipment is subsequently sold.

 

9

Technimount  continually  seeks  advancements  in  product  design  and  quality.  Therefore,  while  this  user  guide 

contains the most current product information available at the time of printing, there may contain minor differences 

between your mounting system and this user guide.

If you have any questions, or for more information, please contact Technimount Customer Service 

customerservice@

technimount.com

.

SUMMARY OF SAFETY PRECAUTIONS

Содержание PRO 77 Series































Отзывы: