Technika T75E1200FL, Инструкция по эксплуатации

Страница: 15 / 17

Avoid damage caused by the overbending of the
inlet hose .
When connecting the water hose and the water tap, do not
damage the screw thread.
Please check the inlet hose conditions regularly. Please
replace it in time if damaged.
When connecting the screw thread of the inlet hose and
the inlet valve, prevent the screw thread screwed
incorrectly or it will wear or leak.
3
Screw tight the tap in the
direction of screw thread
of the inlet hose. Connect the hose to the water
inlet at the back of the washing
machine.
4
Installation Instruction
14
Please use 240V AC power point 10AMPS as per the data label .
Make sure that the voltage of the power supply is the same as the
electric specification of the washing machine.
Please do not connect it with the power connection board, the
universal plug or socket.
Please do not connect the power supply with wet hands.
If the power cable is damaged if must be replaced by a
qualified
person.
Power Supply Connection
Please do not pull out the plug by pulling the power wire with force.