Getting Started
Before using the player you should charge the battery
Win2000/XP/Vista – The system will auto-recognise the player
Win 2000:
ensure you have SP3 installed
Win XP:
To use the latest Media Player (WMP11) you should have SP2 installed
• Make sure the player is switched off.
• Connect the supplied USB cable to the player
• Plug the cable into a free USB port on the PC.
• If connection is successful you will see the player screen on the right.
• You should leave the player battery to charge for at least six hours.
While the player is charging you can upload music and picture files directly to the
player. To view video files on the player you will need to convert them to a suitable
format.
See Page 13-15 for details
You cannot operate the player controls when it is connected to the PC!!
RESETTING THE PLAYER
When the player is connected to a PC, there is a faint possibility that an electrostatic
discharge may cause the player to freeze and the screen to blank out. In the event of
this happening it will be necessary to perform this reset procedure.
• Disconnect the player from the PC
(Refer to Page 15).
• Locate the RESET hole on the player
• Place a small piece of wire (the end of a paperclip) into the hole and press gently.
• This will reset the player which will now work normally.
Ver 2 .620.007