Technika LCD19-915, Руководство по эксплуатации

Страница: 29 / 39

English - 28 -
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the
Install menu.
Colour System
Press “ ” or “ ” button to select Colour System .
Use “ ” or “ ” button to change the colour system to
AUTO, PAL, SECAM, PAL60, NTSC 4,43 or NTSC
3,58.
Store
Press “ ” or “ ” button to select Store . Press “ ” or
“ OK ” button to store the settings. “ Stored... ” will be
displayed on the screen.
Programme Table
Select Programme Table by pressing “ ” or “ ”
button. Press “ ” to display Programme Table:
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Name
To change the name of a programme, select the
programme and press the
RED button.
The fi rst letter of the selected name will be highlighted.
Press “ ” or “ ” button to change that letter and “ ”
or “ ” button to select the other letters. By pressing
the
RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the
GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the
GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
Press “ ” or “ ” button to select your country. If you
want to exit from A.P.S. function, press the
BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
Whenever you press the BLUE button, APS function
stops and Programme Table appears on the screen.
If you wait until the end of APS, Programme Table
will be displayed with the programmes found and
located.
MB45_[GB]_1900UK_PVR_IDTV_NICKEL9_19882W_10066963_50161761.indd 28 29.01.2010 14:25:02