- 11 -
CONNECTING A POWER CORD
CONNECTING A TV ANTENNA
CONNECTING A TV ANTENNA/CABLE/SATELLITE
To view television channels correctly, a signal must be received from one of the following
sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Note:
For receiving over-the-air TV broadcasts,
we recommend that you use an external
fixed antenna. Should you require the
use of a temporary antenna, please ensure
that you purchase an antenna with
sufficient ability to receive in weak signal
areas. Only when you are in close
proximity to a transmitter will a temporary
antenna reproduce a signal as strongly
as a fixed antenna.
For best picture quality from a Satellite or
Cable system, connect to the TV by the
SCART connector as shown on Page 23.
Satellite, Cable, or
TV antenna cable to
TV ANTENNA
CABLE Terminal
(cable not included)
CONNECT THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the
STD.BY/ON
button on the unit or remote
control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and the
TV is switched off before making connections.
• Make sure that all the components are connected
correctly.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
• The apparatus should not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, should be placed on
apparatus.
• The mains plug is used as the disconnecting
device. It should remain readily accessible and
should not be obstructed during use. To be
completely disconnected from the supply mains,
the mains plug of the apparatus should be
disconnected from the mains socket outlet
completely.
To AC outlet
2-12-3WO-1.pmd
22/08/2007, 17:00
11
