Technika BB 207, Руководство пользователя

Страница: 6 / 12

BB207 Portable CD/Cassette Player with AM/FM Radio
4
ADJUSTING THE VOLUME
To
increase
the volume – Rotate the volume knob
clockwise.
To
decrease
the volume – Rotate the volume knob
anticlockwise.
Important Note:
Always refrain from turning the
volume knob to very loud settings, especially on
CD, as the distortion is unpleasant to listen to and in
extreme cases could damage the loudspeakers or
your hearing.
USING THE CD PLAYER
Preliminaries
• Set the FUNCTION SWITCH to ‘CD’.
• Open the CD door with the finger lift at the right
hand side of the door.
• Before first use, remove the protective card from
the CD compartment.
• Place a CD (label up) on the central spindle.
• Press gently to secure the CD in place.
• Close the CD door.
The disc will spin briefly and then
stop. The display indicates the number
of tracks on the disc.
To Play A CD
• Press the PLAY/PAUSE button .
• The disc will play from Track 1 and the Play icon
will light up.
To Pause A CD While Playing
• Press the PLAY/PAUSE button.
• The disc will pause. In Pause mode
the sound mutes and the display
flashes.
• Press PLAY/PAUSE again to resume play.
To Stop A CD While Playing
• Press the STOP button. The play
icon extinguishes.
To Play A CD From A Selected Track
• Insert the CD.
• Press SKIP
or , repeatedly to select the
track.
• Press PLAY/PAUSE to play from the track.
To Change Tracks During Play
• Press SKIP or repeatedly,
to select and then play from the
desired track.
To Go Back To The Start Of A Track During Play
• Press SKIP once.
To Search For A Particular Passage During Play
• Press and hold SKIP or until the desired
passage is located. During the search the sound
is played faster than normal and at a reduced
volume.
• Play returns to normal when SKIP or is
released.
Repeating A Track Or A
Complete Disc
A single track or the complete disc
may be repeated.
• Press the REPEAT button to
cycle the repeat mode:
• Repeat can be selected when
a disc is playing or stopped.
• Search and track select operate in Repeat mode.
• Press STOP to cancel Repeat and stop the disc.
Program Play
Program play should be selected when the CD is
stopped.
To Select And Play A Program
• Press PROGRAM. The
‘PROGRAM’ indicator lights. The
display briefly flashes 1 and then
indicates
00
.
• Press SKIP / to select the
track.
• Press PROGRAM to store the
selection. The display briefly
flashes
02
and then indicates
00
.
• Choose another track. The display
flashes the chosen track.
• Press PROGRAM to store the selection. (You may
choose up to 20 tracks in this way)
• Press PLAY/PAUSE . The program will play
once and stop.
DISC REPEAT REPEAT OFF REPEAT TRACK