12
GETTING STARTED INITIAL SET UP
As part of our ongoing development to reduce power consumption, we have added an extra function to this Television
called ‘Ecohome’ (you will see this during the fi rst time installation set up). Power consumption using the Ecohome function
is approximately 15% lower than some other modes. The picture brightness is reduced using the Ecohome function. If this
function is not suitable for your viewing environment, you can select other modes as necessary. (Please note, ‘Demo’ mode is
for optimum default picture settings, however, power consumption is approximately 15% higher than ‘Ecohome’ mode)
Please refer to the user guide section ‘Picture settings’ in order to change the mode to one that maybe more suitable for
your environment.
Wired network connection.
If you selected ‘Wifi ’ in step 3A,
skip to 3C. If you selected ‘Skip’ in
3A, skip to 3E
Ensure you have connected the Cat 5/
Ethernet cable to the TV and your
Broadband router as per step 2B
Press OK on the remote control and the
TV will connect to the network
Wifi network connection.
Ensure you have connect the USB Wifi
dongle as per 2B
Press OK on the remote control and the TV
will search for available wireless networks.
If your Wifi connection has security
enabled, you will need to obtain and enter
the password/key in step 3D.
If you do not know the password, you
should refer to the user documentation that came
with your router from your Internet providor.
Enter your password/WEP key using
either:-
Onscreen keyboard and the arrow
direction and ‘OK’ keys on the
remote control.
Qwerty keyboard on the reverse
of the remote control. (you need
to ‘unlock’ the keyboard using the
bottom/left key with a picture of
a padlock on it) to enter numbers,
press the ALT button to activate the
number keys.
Once you have entered your passwork/
key, Press the blue/info button on the
front of the remote control to connect.
After connecting to internet or if
you chose to skip this, the TV will
start to tune in the TV channels
and the following screen will
appear.
Once tuning is complete you
need to confi rm the Country,
primary and secondary region by
pushing OK.
If after tuning some channels are
missing, please refer to section 11.
If the TV fi nds some, but not all, of the channels you would expect
to receive, this is because the signal being received by the TV is
inadequate. In most circumstances, this can be corrected with the
simple addition of a Signal Booster between the TV and the TV aerial
wall socket as shown. Once the signal booster is connected, retune the
TV in order to receive all of the channels
You will be welcomed with the fi rst time installation screen.
OSD Language - The only option is English
Country - The only option is UK. (This TV will only operate in UK)
Tune Type - Select from Freeview, Analogue or Skip
Environment - Default is Ecohome (uses less power)
Network Setup - Select from Wired (CAT 5), Wifi (USB Wifi Dongle) or
Skip (if you do not wish to set up a network now).
If you select to Skip network set up, go to 3E.
When you are happy with your selections, press ‘OK’
STEP
3
- Initial TV set up
3B
3D
3E
3F
3C
3A
Connecting to the Internet
- for further information on using the built
in internet applications, please refer to the user guide section ‘Smart
Functions’
Getting Started - Initial Set Up
User Guide - Technika 22-212S.indd Sec1:12
User Guide - Technika 22-212S.indd Sec1:12
01-Oct-12 4:46:22 PM
01-Oct-12 4:46:22 PM
