Technics SX-KN2400, Руководство по эксплуатации

Страница: 135 / 199

Part IV Sequencer
84
QQTG0692
Se
qu
en
ce
r
Song Select
You can select a desired song from the list of recorded songs.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
SONG SELECT.
• The display looks similar to the following.
3.
Use the SONG SELECT
▲
and
▼
buttons to
select a song.
• The total amount of memory used for the cur-
rent song is shown as a percentage (%) to the
right of the song name.
• If the NAMING button is pressed, the NAMING
display appears.
• To optimize memory, songs you do not wish to
preserve should be deleted. (Refer to page
93.)
Punch Record
If you make a playing error during REALTIME RECORD or would like to change the recording for some
other reason, you can use the punch recording feature to correct a selected portion of the performance
without having to redo the whole part.
1.
On the SEQ MENU display, use the SONG
SELECT
∧
and
∨
buttons to select the song
number. Then select RECORD & EDIT.
2.
On the RECORD & EDIT display, select
PUNCH RECORD.
• The display looks similar to the following.
3.
Select the track which contains the portion you
want to correct.
• You cannot select a track in which no data is
stored.
• On the display “REC” indicates tracks which
are being recorded, and “PLAY” indicates
tracks which are being played back.
4.
Use the MEAS
∧
and
∨
buttons to specify the
beginning measure of playback.
• “MEASURE=” indicates the current measure
number.
5.
Press the START/STOP button to begin play-
back of the specified track.
Recording the performance
Playing error
Replay this portion
Recording mode
Punch in Punch out
Playback
09_Part IV.fm 84 ページ ２００３年２月５日 水曜日 午後１時３４分