Technics SL-G700, Руководство по эксплуатации

Страница: 97 / 109

97
Please Wait
This is displayed, for example, when this unit is
turned to standby/on. (For up to approx. 1 minute
and 30 seconds)
• Wait for the display disappears.
Reading
The unit is checking the CD information.
• After this display has disappeared, start operating.
“Remote ” (“ ” stands for a number.)
The remote control and this unit are using different
modes.
• Change the mode on the remote control. (
⇒
22)
Searching
The unit is checking the media server on the
network.
•
Check to see if there is a server in same network.
Unlocked
“COAX” or “OPT” is selected, but no device is
connected.
The sampling frequency components, etc. of the
audio signals are not input correctly.
• Check the connection with the device. ( ⇒ 48)
• For supported formats, refer to “File format”.
(
⇒
107)
USB Over Current Error
USB device is drawing too much power.
• Disconnect the USB device and turn the unit to
standby and on again. ( ⇒ 45)
• Turn this unit off and on.
Wi-Fi Setup
Select “On” and press [OK] to enter the network
setting. ( ⇒ 30)
•
To exit the network setting, select “Off” and press
[OK].