Technics SL-G700, Руководство по эксплуатации

Страница: 95 / 109

95
(Continued)
Messages
AUTO OFF
The unit has been left unused for about 20 minutes
and will shut down within a minute. (
⇒
76) Press
any button to cancel it.
Checking Device
The unit is checking the connected USB device.
• After this display has disappeared, start operating.
Download Fail
The firmware download has failed.
The network is not connected to the internet.
•
Press any button to exit. Please try again later.
•
The server cannot be found. Press any button to
exit. Make sure that the network is connected to
the internet.
Empty
The selected folder is empty.
• Move tracks into the folder and retry the
operation.
The server is not found on the network.
•
Check to see if the server is connected to the same
network as this unit, and retry the connection to
this unit. ( ⇒ 28)
No station or playlist is registered to the favourite
list.
• Add a station or playlist to the list. ( ⇒ 80)
Error
Incorrect operation is performed.
• Read the instructions and try again.
Fail
Network connection is not complete.
• Try the setting again. ( ⇒ 28)
Firmware update is available
The firmware (free of charge) for this unit is
available.
Press [NWP].
Press [OK].
Press [ ], [ ] to select “Yes” and then press
[OK].
•
The progress is displayed as “Updating %”
while updating. (“ ” stands for a number.)
• Do not disconnect the AC mains lead or turn
this unit to standby while updating. ( ⇒ 77)
•
When the update has finished successfully,
“Success” is displayed.
Press [ ] on the unit to turn this unit off and
on.
•
For the update information, refer to the following
website.
www.technics.com/support/firmware/