16
When other equipment responds to the supplied remote
control, change the remote control code.
≥
The factory default is “Mode 1”.
≥
Only available from the SU-C700/ST-C700 remote control:
Point the remote control at this unit, and press
and hold [OK] and the numeric button for at least
4 seconds.
≥
When the remote control code is changed, the new code
will appear on the display for a few seconds.
≥
When the SU-C700/ST-C700 is connected via the system control
function, change its remote control code as well as the remote
control code for this unit.
Select English or French for the display.
≥
The factory default is “English”.
≥
Operation with the touch panel on the unit:
1
Touch [MENU] repeatedly to select “Setup”
and then touch [
1
/
;
].
2
Touch [MENU] repeatedly to select
“Language”.
3
Touch [
:
,
9
] to select “English”/
“Français” and then touch [
1
/
;
].
4
Touch [
∫
] twice after you have finished
setting.
≥
Operation with the SU-C700/ST-C700 remote control:
1
Press [CD].
2
Press [MENU].
3
Press [
3
,
4
] repeatedly to select “Setup”
and then press [OK].
4
Press [
3
,
4
] repeatedly to select
“Language”.
5
Press [
2
,
1
] to select “English”/“Français”
and then press [OK].
6
Press [MENU] after you have finished
setting.
You can automatically link this unit with SU-C700 to operate
them.
Preparation
1
Connect this unit and the SU-C700 with a system
connection cable and a coaxial digital cable. (
>
9)
2
Set the power switch lever of this unit and the SU-C700
to the [
Í
/I] position.
∫
Switching this unit and the SU-C700 to
on/standby simultaneously
≥
When this unit and SU-C700 are in standby mode, while
pointing the SU-C700/ST-C700 remote control at this unit,
press [CD
Í
] so that this unit and SU-C700 switch on
automatically.
∫
Switching the SU-C700’s input source
automatically
When you perform an operation such as playback on this
unit, the input source of the SU-C700 will be automatically
switched to “COAX2”.
≥
For information on the operations of the SU-C700, please also
refer to its operating instructions.
Remote control code
[OK] + [1]
Set the code to “Mode 1”
[OK] + [2]
Set the code to “Mode 2”
Language
Using the system control
function
(16)
SL-C700-SQT0934.book 16 ページ ２０１５年３月２４日 火曜日 午後５時３３分
Содержание SL-C700
Страница 1: ...Owner s Manual Manuel d utilisation Compact Disc Player Lecteur de disques audionum riques SL C700...
Страница 2: ......
Страница 39: ...Fran ais Canada...
