background image

English

(24)

24

If your product does not work properly because of a defect in materials 
or workmanship, Panasonic Corporation of North America (referred to 
as “the warrantor”) will, for the length of the period indicated on the 
chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or 
refurbished parts, (b) replace it with a new or a refurbished equivalent 
value product, or (c) refund your purchase price. The decision to repair, 
replace or refund will be made by the warrantor.

During the “Labor” warranty period there will be no charge for 
labor. During the “Parts” warranty period, there will be no charge 
for parts. This Limited Warranty excludes both parts and labor for 
non-rechargeable batteries, antennas, and cosmetic parts 
(cabinet). This warranty only applies to products purchased and 
serviced in the United States. This warranty is extended only to the 
original purchaser of a new product which was not sold “as is”.

Mail-In Service

--Online Repair Request

Online Repair Request

To submit a new repair request and for quick repair status visit our 
Web Site at 
http://shop.panasonic.com/support

When shipping the unit, carefully pack, include all supplied 
accessories listed in the Owner’s Manual, and send it prepaid, 
adequately insured and packed well in a carton box. When 
shipping Lithium Ion batteries please visit our Web Site at 
http://shop.panasonic.com/support as Panasonic is committed to 
providing the most up to date information.

 

Include a letter 

detailing the complaint, a return address and provide a daytime 
phone number where you can be reached. A valid registered 
receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE 
PURCHASER WILL BE REQUIRED TO FURNISH A SALES 
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF 
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. 
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT 
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic 
damage. The warranty ALSO DOES NOT COVER damages which occurred 
in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, 
introduction of sand, humidity or liquids, commercial use such as hotel, 
office, restaurant, or other business or rental use of the product, or service 
by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED 
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS 
WARRANTY.

(As examples, this excludes damages for lost time, travel to and 
from the servicer, loss of or damage to media or images, data or 
other memory or recorded content. The items listed are not 
exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE 
PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental 
or consequential damages, or limitations on how long an implied 
warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have 
other rights which vary from state to state. If a problem with this 
product develops during or after the warranty period, you may 
contact your dealer or Service Center. If the problem is not handled 
to your satisfaction, then write to:

Consumer Affairs Department
Panasonic Corporation of North America
661 Independence Pkwy 
Chesapeake, VA 23320

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS 
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

 

for all your Technics gear

Go to

 http://shop.panasonic.com/support

 

 Get everything you need to get the most out of 

your Technics products

 Accessories & Parts for your Camera, Phone, A/V 

products, TV, Computers & Networking, Personal 

Care, Home Appliances, Headphones, Batteries, 

Backup Chargers & more…

 

Customer Services Directory

 For Product Information, Operating Assistance, 

Parts, Owner’s Manuals, Dealer and Service info 

go to http://shop.panasonic.com/support

 For the hearing or speech impaired TTY: 1- 877-833-8855

Limited Warranty (ONLY FOR U.S.A.)

Limited Warranty Coverage
(For USA Only)

Technics Products – Limited Warranty

The model number and serial number of this product can 
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep 
for future reference.

MODEL NUMBER

ST-G30

SERIAL NUMBER

SL-1500C

As of February 2019

Product or Part Name

Parts

Labor

Technics Turntable System
(SL-1500C)

2(two)years 2(two)years

Содержание SL-1500C


































































Отзывы: