Page
3
of
6
•
Use a nearby and easily accessible main socket to be able to unplug the equipment quickly and safely if necessary.
Connecting to the mains supply
•
This equipment is designed to operate at 100-240V AC, 50/60Hz.
•
Only the power adapter supplied with the decoder must be used.
Remote Control Unit
STB LED Definition Table
STB status
LED Behaviors
On
Green
Deep standby
Off
Acknowledge RCU code reception
Blinking red once
Your remote control is specifically designed to be used with your decoder and it requires some
specific batteries (See the chapter Technical Specifications). Insert batteries correctly. There may
be a risk of explosion if the batteries are incorrectly inserted. Do not attempt to recharge
disposable or non-reusable batteries.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like. The batteries use some hazardous substances which are very polluting
for the environment. Do not throw them out. Remember to dump them in collection points.
Technical Specifications
Operating Voltage
100-240 VAC ~ 50/60 Hz
Typical Power Consumption
< 12W MAX
Active standby Power Consumption
< 2W
Deep standby Power Consumption
<0,5W
Weight
260g
Dimension (Bigger diam x Top diam x H)
130 x 130 x 29.9mm
Operating Temperature Range
5°C to +45°C
Storage Temperature Range
-25°C to +55°C
Remote Control Battery Type
2 batteries AAA 1.5V
External Power Supply Output Voltage /Current
12V DC /1A
Set Top Box Input Voltage /Current
12V DC /1A
