Page
2
of
6
ONEtv SET-TOP BOX
SAFETY INSTRUCTIONS AND REGULATORY NOTICES
BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ ALL SAFETY INSTRUCTIONS
Notice to consumers
UIW4054MIL is an OTT/Pay-Tv Set-Top Box receiving digital signals from your service provider through Wi-Fi or Ethernet cable connection
and delivers programs in Standard-Definition (SD), High-Definition (HD) video formats (up to 1080p/60) and Ultra-High-Definition (UHD)
video formats (up to 2160/60p). To display UHD programming it is necessary that the programming originates in UHD format and must
have a television that supports said format (UHDTV).
Using equipment safely
Your Equipment has been designed to meet international safety standards, but you must take care if you want it to perform properly and
safely. It is important that you read this booklet completely. If you have any doubts about the installation, operation, or safety of this
Equipment, please contact your supplier.
Ensuring optimum performance
•
Locate the decoder at a distance of 7 to 10 cm from other objects or surfaces to allow proper ventilation.
•
Keep the front side facing the user.
•
Regularly clean the ventilation openings with a soft, clean, and dry cloth, free from solvents or abrasives.
Connection to Television Coaxial Cable
Equipment connected to the protective earth of the building installation through the mains connection or through other equipment with a
connection to protective earth and to a cable distribution system using coaxial cable, may in some circumstances create fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-
11 or equivalent).”
To prevent the risk of electric shock
•
Disconnect the decoder from the mains supply before connecting or disconnecting to other equipment. Direct contact with the AC
power will cause a serious electric shock that can be lethal.
•
Do not try to remove the
decoder’s cover. In the event of failure, contact Customer Service for repair.
•
Do not insert any type of object into the holes, slots or any other openings on the decoder.
•
Do not block the decoder’s ventilation slots; Do not place it on soft surfaces or carpets for use.
•
Do not place objects over the decoder, especially containers with liquids that may spill or drip. Do not expose the decoder to dripping
or splashing. In this situation, unplug it immediately and contact the Customer Service.
•
Do not keep the decoder in excessively hot, cold, or damp conditions. The decoder is intended to operate at an ambient temperature
of less than 45
degrees Celsius and a maximum humidity level of 75%.
•
In case of storms, it is recommended that you unplug the decoder from the mains and from the other connected devices (TV set,
antenna and Ethernet devices).
