Technicolor TC4310, Руководство пользователя, Страница: 8 / 28

Page 7 / 27
TC4310 User’s guide
The lights on the front panel LEDs are described in the table below (from left to right):
ON = the LED is light, OFF = the LED is gray, FLASH = the LED is blinking.
TC4310 Power DS US ONLINE LINK Description
ON ON ON ON ON
Power on 0 25 sec
Boot-up
Operation
X FLASH FLASH FLASH X
Following system initialization complete to (before) DS
scanning
ON FLASH OFF OFF X
During DS scanning and acquiring SYNC
ON ON FLASH OFF X
From SYNC completed, receiving UCD to ranging
completed
DOCSIS
During DHCP, configuration file download,
registration, and Baseline Privacy initialization
Start-up
Operation
ON ON ON FLASH X
DHCP status, LED SHOULD be ON 1 sec, and OFF 1
sec
Tftp status, LED SHOULD be ON 0.25 sec, and OFF
0.25 sec
ON ON ON ON X Operational (NACO=ON)
ON FLASH FLASH OFF X Operational (NACO=OFF)
FLASH FLASH FLASH FLASH FLASH
Wait registration with all DS and all US – Lights Flash
sequentially from the right to left
Minimum duration 3 seconds
Channel
Bonding
Operation
X X X X OFF
From 1 to 4 DS, from 1 to 4 LEDs are ON.
From 5 to 8 DS, From 1 to 4 LEDs are flashing
Duration 3 seconds
OFF X X X X From 1 to 4 US, from 1 to 4 LEDs are ON.
FLASH FLASH FLASH FLASH FLASH Wait registration with all DS and all US – Lights Flash
sequentially from the left to right
Minimum duration 3 seconds
CPE
Operation
X X X X
OFF
ON
FLASH
No Ethernet Link
Ethernet Link
TX/RX Ethernet Traffic
SW Download
Operation
ON FLASH FLASH ON X
A software download and while updating the FLASH
memory
Table 1-1 LED behavior