Technicolor DCI401, Руководство по быстрой настройке

Страница: 17 / 25

17
If you are not successful the first time, try again.
Step 8
Point the new remote at the TV.
Press TV POWER on your Remote to turn on your TV.
If your TV responds ( turns on ), then you have successfully programmed your
Remote.
The setup of the Remote is now complete.
Two Remotes
If you were unable to program your remote, you will need to use two
remotes to operate your TV:
the Digital Adapter Remote and the one that came with your TV.
Setting the Remote Volume
1. Use the remote control that came with your TV to adjust the volume to
a comfortable level. This should be the last time you’ll use this remote for
volume control.
2. Going forward use only your Digital Adapter Remote to adjust volume up
or down.
Caution:
Don’t use your TV remote to change channels.
Your TV must always be set to the proper
Input, HDMI, Ch 3 or Ch 4
or you will see a snowy or blank screen.
When the Remote Control is programmed to operate the TV, there are
5
keys that control the television:
TV POWER
VOLUME -
INPUT
MUTE
3698674A final4 17 10/5/11 4:38 PM