P-10
Connecting the PW1610PKG to a Passive Speaker Using the Speakon Output
The PW1610PKG comes with a powered speakon output which will provide the power to produce sound from both
the powered and passive speakers. Using the speakon speaker cable connect the Speaker OUTPUT on the
powered speaker to the Input on the passive speaker.
NOTE: When making this connection the powered speaker should be powered OFF and the volume knobs
should be turned down. After the connection is completed the powered speaker can be turned on. Once the
audio begins to play the volume can slowly be raised.
After inserting the speakon cable turn the connector to the right so the lock it into place. The metal portion of the
cable should be in the center position when the cable is properly in place.
Once the speakon cable has been connected to the PW1610PKG speaker, follow the same steps listed above and
connect the cable to the INPUT on the passive speaker.
PW1610PKG
On the rear of the powered speaker insert the speakon
cable into the speaker output. The speakon connector has
2 cut-outs, a wide one and a narrow one. These must
match the cutouts on the speakon input.
Once the speakon cable has been installed, turn the
cable clockwise to lock it into place. Once locked into
place the metal portion of the cable will be in the
center position.
The image above shows the speakon cable properly installed
into the speakon connector.
As shown above, the metal portion of the connector has been
turned and is now in the center position.
