P-3
BLUET32LG Front Panel:
6. Left Satellite Speaker: Connect this speaker to the left satellite speaker output on the rear on the base unit
of the BLUET32LG.
7. Light Globe Power Switch: Press this button to power on / off the top mounted light globe.
8. Power Switch: Before the unit is powered on, all of the level controls should be turned down all the way.
Once powered on, slowly begin to raise the levels of the inputs. This will prevent damaging both the speaker
and the amplifier.
9. Master Volume: Turn this knob to increase or decrease the master volume.
10. Right Satellite Speaker: Connect this speaker to the right satellite speaker output on the rear on the base
unit of the BLUET32LG.
11. Input Selector: Use this button to switch between all the inputs.
12. Play / Pause Button: When the input selected is USB/SD/Bluetooth, press this button to pause the signal from
the USB flash drive, SD card, Bluetooth connected to the USB input. Press this button again to play. The
play/pause function will only work for the USB flash drive, SD card or Bluetooth inputs.
13. Previous Track Button: Press this button to go back to the beginning of the previous track on either the USB
flash drive, SD Card or Bluetooth inputs. Press and hold down this button to decrease the volume.
14. Next Track Button: Press this button to go back to the beginning of the next track on either the USB flash
drive, SD Card or Bluetooth inputs. Press and hold down this button to increase the volume.
15. EQ Mode Selector: When playing from the USB flash drive, SD Card or Bluetooth Inputs press this button to
switch among the pre-set equalization modes.
16. AUX (1/8”) Input: Connect your MP3 player or computer here. Make sure to press the input selector button (11)
until the unit is set to the AUX input.
17. SD Card Input: Insert your SD card into this slot. The unit will only read .mp3 & .wma files from SD card. The
maximum storage size of the SD card cannot exceed 16GB. Make sure to set the input is set to USB / SD.
18. USB Input: Insert your USB flash drive into this slot. The unit will only read .mp3 & .wma files from the USB
flash drive. The maximum storage size of the USB flash drive cannot exceed 16GB. Make sure to set the input is
set to USB / SD.
19. Input Indicator: See details on following page.
BLUET32LG
