Manufactured by:
T
ECHNICAL
C
ONCEPTS
• 1-800-551-5155
®
AutoFlush
®
Clamp
for Urinals & Toilets
Looks Clean - Is Clean
™
The AutoFlush
®
sends out a continuous infrared beam that is reflected back by the presence of a person in front of the urinal
or toilet.“Object Lock”technology differentiates between someone walking past the unit or actually using the fixture.
If flush handle is leaking, replace before installing AutoFlush
®
AutoFlush® for Urinals
AutoFlush® for Toilets
Allen Wrench
Sensor Adjustment
Tool
4 “C” Alkaline Batteries
AUTOFLUSH
®
COMPONENTS
-
+
-
+
1.1
Using the supplied Allen
wrench, remove battery com-
partment.
1.2
Remove AutoFlush
®
cover by
rotating the cover up at the
end over the battery com-
partment and slide out.
See illustration 1.2
INSTRUCTIONS
1.1
1.2
(Continued)
1.3
Use the Allen wrench to
unscrew the two hex bolts at
the neck of the unit until a
few threads are still screwed
into the connecting bracket.
1.4
Slide the AutoFlush
®
on to
the flush handle and secure
the mounting clamp over the
existing handle base.
NOTE:
If the unit is on a high mount
toilet flush valve where the flush han-
dle is approximately 40” above the
floor, you should rotate the AutoFlush
®
down to ensure sensor is directed
at user.
1.3
1.4
(Continued)
1.5
Replace the AutoFlush
®
cover.
See illustration 1.5
1.6
Install 4 “C”cell alkaline bat-
teries into the battery com-
partment noting the battery
position marks on the inside
of the compartment. Slide
the battery compartment into
the AutoFlush
®
unit and
secure tray with Allen wrench.
The last three turns of the
wrench will activate the
AutoFlush
®
unit.
1.5
-
-
+
-
+
+
1.6
1.4
NOTE:
Fits Sloan and Zurn flush handles. To fit other flush handles contact TC customer service at 800-551-5155.
Step 1.
Step 1.
Step 1.
