100BASE-T1 MediaConverter_BCM
User Manual
10
2.2
Other interfaces
2.2.1
DIP-switches (4)
The 100BASE-T1 MediaConverter_BCM has two DIP switches for configuration (see
C
2.2.2
Status LEDs (2)
The 100BASE-T1MediaConverter_BCM has two status LEDs at the front side of the
case for the 100BASE-T1 Port.
color
Description
Green
It is lit when there is a linkup on the 100BASE-T1 port.
Yellow
It is toggling in alternation with the green LED when there is communication.
Table 3: Status LEDs
There is a bug in the used BroadR-Reach PHY. When the 100BASE-T1 Plus and
Minus lines are swapped, and the 100BASE-T1 port is set to Slave then the Link LED is
lit, but there is no data transmission possible. So please connect the
100BASE-T1 lines correctly.
