100BASE-T1 MediaConverter NXP
User Manual
8
2
Hardware interfaces
2.1
Connectors
On the label on top of the device, you can see an overview of all HW interfaces of the
100BASE-T1 MediaConverter_NXP.
Figure 2-1 100BASE-T1 MediaConverter_NXP
2.1.1
Black MQS connector (1)
The pinning of the ECU connectors is listed on the label on top of the device as well.
(See
F
IGURE
2-1
).
The power supply for the device is supplied by pin 1 (12 Volt) and pin 10 (Ground)
If you apply a voltage higher than 18 volts, the device will be damaged!
1
3
2
4
